REXROTH Fv Series, Instruction Manual

Page: 138 / 222

● If parameter ‘Number of fault reset attempts’ [E4.08] is not set to ‘0: Au‐
to reset deactivated’, the converter is automatically reset and restarts af‐
ter the interval of ‘Interval between reset attempts’ [E4.09].
–
Parameter ‘Number of fault reset attempts’ [E4.08] is used to set
the allowed maximum times of attempts for automatic reset in case
of fault;
– Parameter ‘Interval between reset attempts’ [E4.09] is used to set
interval time between reset attempts.
● If fault still exists after ‘Number of fault reset attempts’ [E4.08], the con‐
verter will send an alarm and stop.
● Automatic fault reset is valid to the following fault types: O.C.-1, O.C.-2,
O.C.-3, O.E.-1, O.E.-2, O.E.-3, O.L.-1, O.L.-2, E.-St, CPU- and O.H.
E4.10
Last fault Factory Default 0
Setting range 0 − 23 Minimum unit 1
E4.11
2 nd last fault Factory Default 0
Setting range 0 − 23 Minimum unit 1
E4.12
3 rd last fault Factory Default 0
Setting range 0 − 23 Minimum unit 1
Used to record the recent three faults, and can be viewed after reset. For
fault types, please refer to chapter 8.1 "Fault Types and Solutions" on page
139 .
E4.13
Delete fault record Factory Default 0
Setting range 0 − 1 Minimum unit 1
● 0: No fault record
● 1: Active
–
Delete fault records stored in parameters [E4.10] − [E4.12].
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
136/219
Parameter Settings