REXROTH Fv Series, Instruction Manual

Page: 96 / 222

Fig.7-18: Linear acceleration/deceleration mode
● 1: S-curve mode
–
The output frequency is increased or decreased in an S-curve as
shown in Figure fig. 7-19 "S-curve acceleration/deceleration mode"
on page 94 . The S-curve mode is used to achieve smooth start
or stop.
Fig.7-19: S-curve acceleration/deceleration mode
b1.12
Time of S-curve rising section 1 Factory default 20.0 %
Setting range
0.0 % − 40.0 % (of ‘Accelera‐
tion time 1’ [b1.09])
Minimum unit 0.1 %
b1.13
Time of S-curve rising section 3 Factory default 20.0 %
Setting range
0.0 % − 40.0 % (of ‘Accelera‐
tion time 1’ [b1.09])
Minimum unit 0.1 %
b1.14
Time of S-curve falling section 4 Factory default 20.0 %
Setting range
0.0 % − 40.0 % (of ‘Decelera‐
tion time 1’ [b1.10])
Minimum unit 0.1 %
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
94/219
Parameter Settings