REXROTH Fv Series, Instruction Manual

Page: 140 / 222

H0.04
PZD4, PZD3 setting Factory Default 0
Setting range 0 − 238 Minimum unit 1
H0.05
PZD6, PZD5 setting Factory Default 0
Setting range 0 − 238 Minimum unit 1
H0.06
PZD8, PZD7 setting Factory Default 0
Setting range 0 − 238 Minimum unit 1
H0.07
PZD10, PZD9 setting Factory Default 0
Setting range 0 − 238 Minimum unit 1
In PROFIBUS communication, parameters [H0.04] − [H0.07] are used to set
status variables of PZD area. See chapter 12.3.4 "Periodical Data Communi‐
cation" on page 195 .
H0.08
Communication disconnection detection time Factory Default 0.0s
Setting range
0.0, 0.1 − 60.0s Minimum unit 0.1s
● 0.0: communication disconnection detection is deactivated.
● 0.1 − 60.0s: if the interval between the current communication and next
communication exceeds the communication timeout time, the system
will detect timeout and act according to parameter ‘Communication dis‐
ruption action’ [H0.09].
Normally, this parameter is deactivated. This parameter can used
to monitor the conditions of communication if continuous commu‐
nication is required in a system.
H0.09
Communication disconnection action Factory Default 0
Setting range 0, 1 Minimum unit
● 0: If communication is timeout, the motor freewheels to stop.
● 1: If communication is timeout, the motor keeps running at the set fre‐
quency.
H0.10
Reserved Factory Default 0
Setting range 0 − 65535 Minimum unit 1
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
138/219
Parameter Settings