REXROTH Fv Series, Instruction Manual

Page: 131 / 222

E2.45
Stage 12 action selection Factory Default 0
Setting range 0 − 31 Minimum unit 1
E2.46
Stage 12 running time Factory Default 0.0s
Setting range 0.0 − 5000.0s Minimum unit 0.1s
E2.47
Stage 13 action selection Factory Default 0
Setting range 0 − 31 Minimum unit 1
E2.48
Stage 13 running time Factory Default 0.0s
Setting range 0.0 − 5000.0s Minimum unit 0.1s
E2.49
Stage 14 action selection Factory Default 0
Setting range 0 − 31 Minimum unit 1
E2.50
Stage 14 running time Factory Default 0.0s
Setting range 0.0 − 5000.0s Minimum unit 0.1s
E2.51
Stage 15 action selection Factory Default 0
Setting range 0 − 31 Minimum unit 1
E2.52
Stage 15 running time Factory Default 0.0s
Setting range 0.0 − 5000.0s Minimum unit 0.1s
● To set stages 2 – 15, please refer to the description for stage 1.
● If the running time of a stage is set to 0, simple PLC will skip this stage.
● If parameter ‘Motor standard rotation direction’ [S3.14] is set to ‘2: Deac‐
tivate reverse motor rotation’, simple PLC control will stop immediately
when a reverse rotation command is executed.
● For simple PLC control with external terminals, please refer to parame‐
ters [E0.01]−[E0.08].
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 129/219
Parameter Settings