Reinke Ontrac, Installation And Service Manual

Page: 27 / 207

Ontrac Retrofit with Existing EOS GPS - Iridium (350784C)
Connect the GPS
Receiver cable to the
5 Position Adapter
according to the chart
below.
Step 8.
Connect the GPS Receiver Cable. With the receiver Cable installed through the strain relief connector
and box base re-attach the 5 Position Adapter.
The wire order depends on which GPS Receiver is used,
follow the wire table below for your Receiver type.
Insert the wire in the proper terminal and tighten the
screw to secure the wire. Repeat for each wire.
Step 7. Mount the Ontrac Box to
bracket where GPS EOS was
removed. Reuse existing hardware.
Bolt Bracket to pipe
flanges.
(Use existing
bolts).
Bolt Base of Box to
Top of Bracket.
Cut the unused
wires short. Colors
will vary with
Receiver type.
5 Position Adapter
Connections shown are for
Model 17 Receiver
GPS EOS Board
GPS Receiver Cable
GPS
Receiver
Type
Ontrac Installation Manual
100