Reinke Ontrac, Installation And Service Manual

Page: 201 / 207

ONTRAC ACTIVATION PROCESS
STEP 1: ACTIVATION
Prior to installing the Ontrac unit in the field complete the Reintech LLC Wireless Services Agreement and email to
Dealer Support:
. A reply email will be sent to you within 24 hours with account details and
ontrac@reinke.com
final steps of activation. A copy of this Reintech LCC Wireless Services Agreement was sent with your product. If
you do not have this copy, you may request the latest version by emailing
.
ontrac@reinke.com
STEP 2: INSTALLATION
Now that your Ontrac has been activated use this Ontrac installation manual to successfully install your Ontrac unit.
If your Ontrac has come pre-installed inside the Main Control Panel, simply finish the remaining steps and verify
that the installation is complete. Before leaving the field, complete Step 3:
STEP 3: VERIFICATION
Before leaving the field after installation, verify that the Ontrac is working properly by logging onto
www.ontracbyreinke.com
and entering the account holders username and password. Go to the control page and
send a command to verify the activation and installation was successful. If the account isn't set up yet, you may
visit
to verify if the unit is reporting. Enter the radio number and click
http://admin.ontracbyreinke.com/field_test
“go” to see the most recent report date and time. If you do not have access to the internet, call into Dealer Support
and they can assist you in the verification process. 1-888-XXX-XXXX.
STEP 4: COMPLETION
Finish up your Ontrac Activation process by letting the grower know the Ontrac unit has been successfully
activated. Use the Ontrac operator's manual sent with your Ontrac unit to write down the username and password,
Ontrac serial number, and any other necessary notes to leave behind with the grower.