Reinke Ontrac, Installation And Service Manual

Page: 21 / 207

Ontrac Kit - Tower Mount with Stop - Iridium (350784)
Step 6. Connect Tower Box to Ontrac Box. A 7 Conductor Cable will connect the Tower and Ontrac Boxes.
Follow the Schematic Diagram on page 20 for wiring connections . Use the supplied seven conductor cable
and strain relief connectors. The Ontrac Stop Relay is wired in series with the pivot safety circuit. When the
stop command is received by Ontrac, the safety circuit is opened for eight seconds to stop the pivot.
The Ontrac to Tower Box Cable functions are:
Green: Ground - Attach to the Tower Box ground terminal
White: Neutral - Attach to the Tower Box neutral
Purple: Forward - Attach to the Tower Box forward AC control wire
Pink: Reverse - Attach to the Tower Box reverse AC control wire
Brown: Limit in - Wire in series with the limit circuit
Yellow: Limit out - Wire in series with the limit circuit
Ontrac Installation Manual
94
Step 5:
Install Ontrac Antenna
on Ontrac Antenna Mount
Bracket
as shown.
(P/N 147051)