Reinke Ontrac, Installation And Service Manual

Page: 8 / 207

!
Iridium Radio Retro Fit (350781)
WARNING!!! DO NOT attempt to perform this procedure until the
Reinke Main Control Panel Disconnect Switch and all Pump Disconnect Switches
are locked in the “OFF” position.
Ontrac Iridium Radios (350781):
This radio was designed to replace Orbcomm radios as they provide
better communication in the field.
Step 1.
Verify retro kit parts are present. Modem Subassy (P/N 140780), Iridium RTU Chip (P/N 116990-17),
Right Angle SMA Connector (P/N 116904), Iridium Antenna (P/N 116990-7), #6 Nut with Star Washer (P/N
1097), Washer #6 X 1/8 x 3/8 NYL (P/N 1531), Screw #6-32 X 1/2” Pan Head Phillips (P/N 3009), Screw #6-
32 X 1/4 Pan Head Zinc (P/N 3040)
Step 2. Remove power from the RTU Board by un-pluging the battery connector located where shown.
P/N 350781
116990-17
140780
116990-7
116904
3009
1097
1531
3040
TOWER MOUNT BOX
POST MOUNT BOX
Ontrac Installation Manual
81
Set-Up