Reinke Ontrac, Installation And Service Manual

Page: 12 / 207

350782 - Ontrac Box (P/N 140782), brackets (P/N 116712) and straps (P/N 116719).
140782 - Power supply kit (P/N 147052), 1-1/4” x 2-1/2” Plate (P/N 146721). Battery (P/N 116900-3) and
battery cable (P/N 116900-9) which are part of 140750.
Verify that all parts match accordingly.
Note: If system has Start/Stop Option refer to the Options section for mounting and installation. Skip
steps 3, 4 &5
Step 3: Mount post base assembly on the next to the last tower (B Tower Box). Make sure the post base
assembly is securely fastened to the water pipe.
Mounting post unit to the water
pipe using straps and brackets.
Post assembly fastened
to water pipe.
140782
KIT TRAC POST-TWR MNT-MONITR
147052
146721
3002
116900-3
116900-9
!
!
Before attempting any service or installation work ensure the Disconnect
Switch on the Main Control Panel is
. Read all installation instructions OFF
and options to be installed before beginning installation.
Ontrac Installation Manual
350782 - (Ontrac Kit Post Tower Mount Iridium) -
This option will allow the operator to
monitor the system while it is stopped or running.
85
140782
116712
116719
350782
TRAC POST-TWR MNT-MONITOR
Ontrac Kit - Post Tower Mount - Iridium (350782)
Step 1:
Fax the ReinTech Wireless Service Agreement to Dealer Support before stating field installation.
(See Set-Up Tab)
Step 2:
Call (888) 872-2360 to set up unit prior to field installation. Write down the account login and
password for later use in verification of working installation.
Note: For panel Mounting Options look under Options page 25 & 26.