Reinke Ontrac, Installation And Service Manual

Page: 37 / 207

Ontrac Tower Mount With Stop & GPS-Iridium (350784GPS)
Ontrac Installation Manual
110
Step 8:
GPS Receiver Options. The GPS CDW System can use three different GPS Receivers, Garmin
17, Garmin 17X, and Hemisphere. Each Receiver uses a different color code for connecting the Receiver
Cable to the CDW Board. The color code table is shown on page 9 and is printed on the CDW Board.
Make sure that the Receiver is connected using the correct color code.
Both Garmin 17 and 17X use the same CDW Board software setting, ANTENNA/GARMIN. When using
a Hemisphere Receiver make sure the CDW Board is set to, ANTENNA/HEMISPHERE. Both End of
System and MCP boards must be set for the correct receiver type.
5 Position Adapter
(P/N 117046)
Step 9: Connecting GPS Receiver Cable
Attach the GPS Receiver wires to the 5 Position Adapter as
shown below. Neatly coil the excess cable inside the Resolver
Box and secure with wire ties. Follow the connection diagram
on the circuit board for the GPS Receiver type used.
Black
Red
Blue
White
Yellow
Garmin 17
connections shown,
follow the table for
other receivers.
GPS
Receiver
Type