Command reference
R&S
®
ZNL/ZNLE
695
User Manual 1178.5966.02 ─ 19
Example:
Suppose that the active channel setup contains an active trace
no. 1.
CALC:MARK:REF:MODE DISC
CALC:MARK2:REF:MODE CONT
Create the reference marker in discrete mode and marker 2 in
continuous mode.
CALC:MARK:REF ON; :CALC:MARK2 ON
Display the two markers. Due to the different modes the horizon-
tal positions can be different.
Manual operation:
See
CALCulate<Chn>:MARKer:MPEak:EXCursion
<TargetSearchVal>
Defines a minimum excursion value for multiple peak searches.
Use
CALCulate<Chn>:MARKer:MPEak:EXCursion:STATe
to activate it.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Value>
Minimum peak excursion
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the excursion to a
format-specific default value.
Manual operation:
See
CALCulate<Chn>:MARKer:MPEak:EXCursion:STATe
<Boolean>
Activates or deactivates the minimum excursion for multiple peak searches.
Use
CALCulate<Chn>:MARKer:MPEak:EXCursion
to set the minimum peak excur-
sion.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Active>
Boolean
Manual operation:
See
CALCulate<Chn>:MARKer:MPEak:THReshold
<Value>
Defines a threshold value for multiple peak searches.
Use
CALCulate<Chn>:MARKer:MPEak:THReshold:STATe
to activate it.
Suffix:
<Chn>
.
Channel number used to identify the active trace
VNA command reference