VNA GUI reference
R&S
®
ZNL/ZNLE
428
User Manual 1178.5966.02 ─ 19
10.9.3.1
Controls on the Config tab
Hide Sensitive Information
Unmasks or masks all stimulus value occurrences in the VNA GUI for the current chan-
nel setup.
When you check "Hide Sensitive Information" for a particular channel setup (to mask
the stimulus values), you are asked to set a password. If this password is non-empty, it
is requested the next time someone tries to uncheck "Hide Sensitive Information" (to
unmask all stimulus values) for this channel setup.
Both checked state and password are stored in (and loaded from) the active channel
setup.
Remote command:
DISPlay:ANNotation:FREQuency[:STATe]
Channel Info
Shows or hides the channel lists in the lower part of the diagrams.
Remote command:
DISPlay:ANNotation:CHANnel[:STATe]
Display Lines softtool
