Command reference
R&S
®
ZNL/ZNLE
707
User Manual 1178.5966.02 ─ 19
Example:
*RST; :CALC:MATH:MEM
Copy the current state of the default trace
'Trc1'
to a memory
trace named
'Mem2[Trc1]'
. The memory trace is not dis-
played.
CALC:MATH:FUNC DIV
Define a mathematical trace, dividing the raw complex data
trace trace by the stored memory trace. The mathematical trace
is displayed instead of the active data trace.
CALC:MATH:STAT?
The response is 1 (mathematical mode for unformatted trace
data switched on, mathematical trace displayed).
Manual operation:
See
CALCulate<Chn>:MATH:MEMorize
Copies the current state of the active data trace to a memory trace. If a mathematical
trace is active, the data trace associated with the mathematical trace is copied. The
memory trace is named
Mem<n>[<Data_Trace>]
where
<n>
counts all data and
memory traces in the active channel setup in chronological order, and
<Data_Trace>
is the name of the associated (copied) data trace.
The exact function of the command depends on the number of memory traces associ-
ated to the active data trace:
●
If no memory trace is associated to the active trace, a new memory trace is gener-
ated.
●
If several memory traces are associated to the active trace, the current measure-
ment data overwrites the last generated or changed memory trace.
Note:
To copy a trace to the memory without overwriting an existing memory trace or
define a memory trace name, use
<MemTraceName>,<DataTraceName>
. To copy an active mathematical trace use
<MemTraceName>,<DataTraceName>
Suffix:
<Chn>
.
Channel number used to identify the active trace
Example:
*RST; :CALC:MATH:MEM
Copy the current state of the default trace
'Trc1'
to a memory
trace named
'Mem2[Trc1]'
. The memory trace is not dis-
played.
DISP:WIND:TRAC2:FEED 'Mem2[Trc1]'
Display the created memory trace in the active diagram area
(diagram area no. 1).
Usage:
Event
Manual operation:
See
VNA command reference
