Command reference
R&S
®
ZNL/ZNLE
1031
User Manual 1178.5966.02 ─ 19
Tip:
CALCulate<Chn>:MARKer<Mk>:BWIDth
to set the bandwidth and query
the results of a bandfilter search. Note the sign convention for input values.
Suffix:
<Chn>
.
Channel number used to identify the active trace.
<Mk>
This numeric suffix is ignored and may be set to any value
because the bandfilter search functions always use markers M1
to M4.
Parameters:
<Bandwidth>
Range:
-100 dB to 100 dB
Increment: 0.03 dB
*RST:
3 dB
Default unit: dB
Example:
See
CALCulate<Chn>:MARKer<Mk>:BWIDth
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DELTa:STATe
<Boolean>
Switches the delta mode for marker
<Mk>
on trace no.
<Chn>
on or off.
Note:
This command is the ZVR-compatible equivalent of
.
Suffix:
<Chn>
.
Channel number used to identify the active trace.
<Mk>
Marker number.
Parameters:
<Boolean>
ON | OFF - enable or disable the delta mode.
*RST:
OFF
CALCulate<Chn>:MARKer<Mk>:FUNCtion[:SELect]
<Mode>
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion[:SELect]
<Mode>
Selects a search mode for the related marker.
The search can then be initiated using one of the commands:
●
CALCulate<Ch>:MARKer<Mk>:SEARch...
●
CALCulate<Ch>:MARKer:REFerence:SEARch...
●
CALCulate<Ch>:MARKer<Mk>:MAXimum
or
CALCulate<Ch>:MARKer<Mk>:MINimum
●
CALCulate<Ch>:MARKer:REFerence:MAXimum
or
CALCulate<Ch>:MARKer:REFerence:MINimum
The marker must be created before using
CALCulate<Chn>:MARKer<Mk>[:STATe]
or
CALCulate<Chn>:MARKer<Mk>:REFerence[:STATe] ON
VNA command reference