R&S ZNL, User Manual

Page: 101 / 1135

Data management
R&S
®
ZNL/ZNLE
101 User Manual 1178.5966.02 ─ 19
File Explorer
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
File Type
Determines whether the global instrument settings with all "Channel"s are stored or
recalled, or the current "Channel" settings only.
Items:
Defines which data and settings are stored or are recalled. Depending on the "File
Type" , either channel setups only, or global settings are available. Which items are
available also depends on the installed options (see also
Chapter 6.2.2.1, "Stored data
types" , on page 98).
Save File
Saves the settings file with the defined filename.
Remote command:
MMEMory:STORe<1|2>:STATe
on page 587
MMEMory:STORe<1|2>:STATe:NEXT
on page 587
Recall in New Channel / Recall in Current Channel
Restores the instrument settings as saved in the selected settings file. If the settings
file contains settings for a specific "Channel" only, select "Recall in New Channel" to
activate a new channel setup with the stored settings. Select "Recall in Current Chan-
nel" to replace the current "Channel" settings.
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe
on page 585
6.2.2.4 Startup recall settings
Access : "Open" icon in the toolbar > "Startup Recall"
Storing and recalling instrument settings and measurement data