Command reference
R&S
®
ZNL/ZNLE
696
User Manual 1178.5966.02 ─ 19
Parameters:
<Value>
Threshold value
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the threshold to a
format-specific default value.
Manual operation:
See
CALCulate<Chn>:MARKer:MPEak:THReshold:STATe
<Boolean>
Activates or deactivates the threshold for multiple peak searches.
Use
CALCulate<Chn>:MARKer:MPEak:THReshold
to set the threshold value.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Active>
Boolean
Manual operation:
See
CALCulate<Chn>:MARKer<Mk>:NAME
<MarkerName>
CALCulate<Chn>:MARKer<Mk>:REFerence:NAME
<MarkerName>
Defines a name for the related marker (see
marker doesn't have to be created before, the name can be assigned in advance.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk>
Marker number (ignored for reference markers)
Parameters:
<MarkerName>
Marker name (string parameter)
*RST:
'M1' for marker no. 1 etc.
Example:
Suppose that the active channel setup contains an active trace
no. 1.
CALC:MARK:NAME '&$% 1'; :CALC:MARK ON
Create marker 1 named "&$% 1" and display the marker .
CALC:MARK:REF ON
CALC:MARK:REF:NAME 'Reference'
Display the reference marker and rename it "Reference".
Manual operation:
See
CALCulate<Chn>:MARKer:SEARch:BFILter:RESult[:STATe]
<Boolean>
Shows or hides the bandfilter search results in the diagram area.
Suffix:
<Chn>
.
Channel number used to identify the active trace
VNA command reference
