R&S ZNL, User Manual

Page: 452 / 1135

VNA GUI reference
R&S
®
ZNL/ZNLE
452 User Manual 1178.5966.02 ─ 19
Remote command:
CALCulate<Chn>:MARKer<Mk>:REFerence[:STATe]
CALCulate<Chn>:MARKer<Mk>:REFerence:Y
Add Marker
Adds a new marker to the active trace. Uses the next "free" marker number
Coupled Markers
Activates or deactivates Marker coupling . The label indicates the selected Coupling
Type :
"Coupling Type" Label
"All" "Coupled Markers"
"Channel" "Coupled Markers in <name of active channel>"
"Diagram" "Coupled Markers in <name of active diagram>"
Coupling also works if Tracking is enabled for Marker <m> in one trace. The Marker
<m> of the other traces then follow the movements of the tracked marker. The same
holds true for the reference marker.
Remote command:
CALCulate:MARKer:COUPled[:STATe]
10.10.2 Marker Props tab
Modifies the properties of a marker created previously (see Chapter 10.10.1, "Markers
tab" , on page 449). The functions (except "Export Markers...") are unavailable if the
active trace contains no markers.
Marker Name
Assigns a (new) name to the active marker. Marker names can contain letters, num-
bers, blanks and special characters.
Marker Settings softtool