![background image](http://html2.mh-extra.com/html/qkm/ah20/ah20_user-manual_3063992019.webp)
AH20 Robot User Manual
4 Document Version V1.0.1 (11-14-2022)
The robot must be well grounded by connecting to the main ground wire
of the factory to prevent static damage; maintenance tools must adopt
special insulation tools.
Confirm that the entire robot system is in a safe environment before
performing daily inspection and regular maintenance of the robot.
Do not plug or unplug the power and communication cables during
normal operation of the robot.
Regularly carry out training for operators on operating rules, industrial
safety, safety instructions and environmental protection.
Users should carry out daily check and regular maintenance of the robot
according to the manual and related requirements and timely replace
damaged parts to ensure safe operation and service life of the robot.
If the robot and its components are scrapped and shall be discarded,
please handle the industrial waste properly in accordance with relevant
laws and regulations to protect the environment.
1.3
Safety signs
The main body of the robot is labeled with the following warning signs.
There are corresponding dangers and warnings near the location where the
signs are labeled, so take sufficient care when operating.
In order to operate and maintain the robot system safely, be sure to observe
the cautions and contents on the warning signs.
Table 1-1 Warning signs
No.
Labeling
Notes