![background image](http://html2.mh-extra.com/html/qkm/ah20/ah20_user-manual_3063992070.webp)
Chapter 5 Product Installation
Document Version V1.0.1 (11-14-2022) 55
5.9.3
Power connection
AH20 Robot has achieved integrated design without power supply box for
power connection, which is convenient for use.
Cable to be used: Power cable
The wiring steps are shown below:
Step 1
Take the power cable out of the accessory box. Install the
aviation plug end of the power cable at the "POWER" connector of
the robot.
Step 2
Tighten the screw cap of the aviation plug clockwise.
Step 3
Plug the other end of the power cable into the 230 V a.c.
socket.
Figure 5-11 Connect the power supply
It is dangerous to perform cable wiring while the
robot is powered on. Before wiring, turn off the relevant