Chapter 5 - System Setup
5-4
PL-5910 Series User Manual
Drive A / Drive B
This setting determines the format used by the PL's internal floppy disk drive. The
available settings are [None], [360K, 5.25in], [1.2M, 5.25in], [720K, 3.5in],
[1.44M, 3.5in], or [2.88M, 3.5in]. The factory settings are Drive A [1.44M,
3.5in] and Drive B [None] and recommended for most users.
Video
Designates the type of display monitor and display adaptor. Selections available
are [EGA/VGA], [CGA40], [CGA80], and [MONO]. Factory setting is [EGA/
VGA] and is strongly recommended for most users.
Halt On
Designates the type of processing that will be performed when an error occurs
during the Initial Start-Up's Self Test. The [All But Keyboard] selection is
factory set and recommended for most users.
[All Errors]
: Displays all errors and stops the unit.
[No Errors]
: Displays all errors and does not stop the unit.
[All,But Keyboard]
: Displays all errors, except for those related to
the keyboard, and stops the unit.
[All,But Diskette]
: Displays all errors, except for those related to
the disk drive (FDD), and stops the unit.
[All,But Disk/Key]
: Displays all errors, except for those related to the disk
drive (FDD) and keyboard, and then stops the unit.
Base Memory / Extended Memory / Total Memory
These features provide information about each type of memory.
