PL-5910 Series User Manual
9-14
Error Type/Location
The error types/locations shown by the Event Viewer are as follows.
Error Action
Using the Event Viewer the following actions can be taken when an error occurs.
• The data shown in the table’s “
” indicates the error type/location.
• The actions to take after an error occurs are set via the System Monitor
Property screen.
When a “+3.3V” error occurs and the buzzer sounds, two errors will be displayed,
“+3.3V Error has occurred.” and “Buzzer has sounded because of +3.3V error”.
Error Action
Error Message
Buzzer
Buzzer has sounded because of oo error.
Popup Message
Popup message has been shown because of
error.
OS Shutdown
Window has been shut down because of
error.
ALARM
ALARM has output because of
error.
LAMP
LAMP has output because of
error.
Error Type
Message
Solution
CPU Voltage
"VcoreA Power Supply Error"
CPU Voltage 2
"VcoreB Power Supply Error"
+3.3V
"+3.3V Power Supply Error"
+5.0V
"+5V Power Supply Error"
+12V
"+12V Power Supply Error"
-12V
"-12V Power Supply Error"
-5V
"-5V Power Supply Error"
System Temperature "System Temperature Error"
CPU Temperature
"CPU Temperature Error"
Universal Input 0
"Universal Input 0"
Universal Input 1
"Universal Input 1"
Watchdog
"Watch Dog Timer Error"
The watchdog timer has timed out.
Backlight
"Back Light Blowout Error"
Replace the backlight unit.
10.3.2 Replacing the Backlight
Check that the operation
temperature is within the specified
range (0
o
C to 45
o
C).
The PL unit may be damaged.
Please contact your local PL
distributor.
Has universal input signal (DIN).
