Chapter 8 - Using MS-DOS
8-28
PL-5910 Series User Manual
8.1.5 Backlight Burnout Detection Program (BLSET.EXE)
This application detects if the backlight has burned out. This program is stored in
[Utility] folder of the PL-5910 Series User Manual & Driver CD. Copy this program
to an FD or to the PL’s hard disk and then execute this program with DOS.
Start-up
BLSET ON [
↵
] or BLSET OFF [
↵
]
[ON] means the touchpanel is disabled when a backlight burnout is detected.
[OFF] means the touchpanel will remain active after a backlight burnout is detected.
The factory setting is [OFF].
For detection feature details, refer to
9.1 RAS Feature.
8.1.7
LAN Driver
Please refer to your network software’s operation manual when installing the desired
driver. For detailed PL driver location information,
6.1.1 Tree Diagram List
8.1.6
Backlight Control Program (INT5F.COM)
This resident program controls the backlight.
Usage
1) Copy the backlight control program (INT5F.COM) to the startup disk.
2) Use a text editor to add the INT5F.COM data to the AUTOEXEC.BAT file.
If an application is started by the AUTOEXEC.BAT file that uses GENIFA,
be sure to enter the INT5F.COM text so that it is started before the appli-
cation that uses GENIFA.
