Chapter 10 - Maintenance and Inspection
10-6
PL-5910 Series Users Manual
• The PL’s backlights are
installed at the top and
bottom of the LCD panel.
Whenever you change a
backlight, be sure to
change both backlights.
• Be sure to insert the con-
nector to the inverter
board and push it until its
rear connector is se-
curely connected, or it
may cause damage.
12) Reattach the PL rear unit to the PL
front unit, using the PL’s guide slots,
i.e. reverse the procedure use to
separate them.
Be careful not to catch or cut any of
the PL’s internal cables while reat-
taching the two units.
13) Replace the six attachment screws
removed in step 3), 4) and 5).
