Pro-face PL-5910 Series User Manual Download Page 52

Page: 52 / 184

3-7

PL-5910 Series User Manual

Chapter 3 - Installing Optional Units and Expansion Boards

2) Close the front maintenance cover.

3) Unscrew the two rear face Blank Panel

attachment screws, and remove the
Blank Panel.

3.1.4

Installing the FDD Unit (PL-FD510)

FDD front face blank panel

FDD rear face blank panel

Be sure to use the following installation procedures to insure that the unit is correctly
installed. As for PL-5910T unit, the attachment procedures are same as PL-5911T
unit.

(PL-5911T)

1) Open the front maintenance cover and

remove the FDD’s blank (filler) panel.

(PL-5911T)

Summary of Contents for PL-5910 Series

























































































































































































Search results

Summary of Contents for PL-5910 Series

Reviews:

Related manuals for PL-5910 Series

Brands by name

Popular brands

Pro-face PL-5910 Series, User Manual

Search results

Summary of Contents for PL-5910 Series

Reviews:

Related manuals for PL-5910 Series

Brands by name

Popular brands