Chapter 5 - System Setup
5-8
PL-5910 Series User Manual
Typematic Delay (Msec)
When [Typematic Rate Setting] is set to [Enabled], this setting determines the delay
period until the initial repetition is started. The [250] selection is factory set. The avail-
able settings are [250], [500], [750], and [1000].
Security Option
This setting designates the area to request a password. If a password needs to be
entered, select [Setup] in BIOS setup, or [System] during system startup. This setting is
NOT available if the password is not set in the [SET SUPERVISOR PASSWORD] or
[SET USER PASSWORD] areas. The factory default setting is [Setup] and is recom-
mended for most users.
[SET SUPERVISOR PASSWORD]
5.2.14 Set Supervisor Password
[SET USER PASSWORD]
5.2.15 Set User Password
Authentication Level
Sets the security level for an application that uses the FirstWare security feature.
Selections can be [High], [Medium], or [Low]. Factory setting is [Low].
OS Select For DRAM > 64MB
Selects the usage method for 64MB or more of DRAM memory.
The available settings are [Non-OS2] and [OS2]. The factory default settting is [Non-
OS2] and is recommended for most users.
HDD S.M.A.R.T Capability
This feature enables/disables the HDD unit's SMART (Self-Monitoring Analysis
and Reporting Technology) feature. The available selections are [Enabled] and
[Disabled], [Disabled] is factory set and recommended for most users.
Report No FDD For WIN 95
This setting determines if the FDD node is reported by BIOS to WIN95. The available
settings are [No] and [Yes]. The factory default setting is [No].
Video BIOS Shadow
This feature enables/disables copying of Video BIOS to RAMF (video accellerator).
The available selections are [Enabled] and [Disabled], [Enabled] is factory set.
Small Logo (EPA) Show
Enables/disables the initial display at startup of the EPA logo. The available selections
are [Enabled] and [Disabled]. [Disabled] is factory set.
