Pro-face PL-5910 Series, User Manual

Page: 31 / 184

Chapter 2 - Specifications
2-10
PL-5910 Series User Manual
„ „
„ „
„ External Output Signal (DOUT, Alarm Output, Lamp Output Port)
„ „ „ „ „ External Power Output
+5V :100mA (MAX)
+12V :100mA (MAX)
• Be sure to operate the unit within its maximum load current. If
the maximum load current exceeds this range, a malfunction or
PL damage may occur.
• Design your electrical system by adding the load current and
voltage values to the terminal voltage. If load current value used
is large, a maximum voltage of 1.5V will exist between the terminals.
• When connecting an induction load, be sure to connect the
above drawing's protection diode(*1).
Rated Load Voltage DC12V to DC24V
Maximum Load Current 100mA/point
Maximum Voltage Drop between T erminals 1.5V (at 100mA load current)
Isolation Method Via photocoupler
For detailed connector wiring information,
2.3.5 RAS Interface (RAS)
(Interface Ciruit)
Connection Example
Cable
R
PC357
Dsub 25 pin connector
4.7k
Ω
SSTA06
DOUT(-) pin 7
Alarm Output(-) pin 9
Lamp Output(-) pin 21
DOUT(+) pin 8
Alarm ) pin 10
Lamp ) pin 22
+5V
DC12V to
DC24V
Load
*1