Chapter 5 - System Setup
5-13
PL-5910 Series User Manual
Onboard Parallel Port
Designates the PL unit's Parallel Port I/O address. The selections include [Dis-
abled], [378/IRQ7], [278/IRQ5], and [3BC/IRQ7]. The [378/IRQ7] selection
is factory set.
Parallel Port Mode
Designates the parallel port's operation mode. This can only be set when the
Onboard Parallel Port is not set to [Disabled]. Settings are [SPP], [EPP],
[ECP+EPP], and [Normal]. The [SPP] selection is factory set.
EPP Mode Select
Designates the EPP mode's specification level. This canonly be set when the
Onboard Parallel Port is not set to [Disabled]. Settings are [EPP1.9], and [EPP1.7].
The [EPP1.9] selection is factory set.
ECP Mode Use DMA
Designates the ECP mode's DMA number. This canonly be set when the Onboard
Parallel Port is not set to [Disabled]. Settings are [1], and [1]. The [3] selection is
factory set.
Onboard Serial Port 3
Designates the interupt number for the PL unit's onoard Serial Port3. The
selections include [Disabled], [3F8/IRQ4], [3F8/IRQ11], [2F8/IRQ3], [2F8/
IRQ10], [3E8/IRQ4], [3E8/IRQ11], [2E8/IRQ3] and [2E8/IRQ10].
The [3E8/IRQ11] selection is factory set.
Onboard Serial Port 4
Designates the interupt number for the PL unit's onoard Serial Port 4. The
selections include [Disabled], [3F8/IRQ4], [3F8/IRQ11], [2F8/IRQ3], [2F8/
IRQ10], [3E8/IRQ4], [3E8/IRQ11], [2E8/IRQ3] and [2E8/IRQ10].
The [2E8/IRQ10] selection is factory set.
