1-3
PL-5910 Series User Manual
1.2.1
Connecting the PL Unit
The PL unit's touch panel can connected via a serial (COM4) interface or a USB
interface. The PL unit's factory setting is for using a serial interface. If you have installed
Windows
®
2000 in your PL unit and you wish to change this setting to a USB interface,
please follow the steps given below.
MS-DOS
®
and WindowsNT
®
4.0 operating systems are not compatible with USB
interfaces.
Touch Panel I/F Selector Switch
Set the touch panel selector switch to "U". For details,
2.4 PL Part Names and Features
Be sure to change the touch panel selector switch only after turning the
PL unit OFF. If the PL unit is running when this is performed, it can cause
the unit to malfunction.
