Chapter 6 - OS Setup
6-2
PL-5910 Series User Manual
Prior to using the PL unit with the MS-DOS
®
/WindowsNT
®
4.0/Windows
®
2000
operating system, certain utility software must be installed.
1. Installing the HDD Unit
Be sure to check that the hard disk drive unit (PL-HD220), CD-ROM drive
unit (PL-DK200), floppy disk drive (PL-FD500/PL-FD510) and a PS-2
(mini-DIN) type keyboard are all correctly connected to the PL unit.
Chapter 3 Installing Optional Units and Expansion Boards
PL-HD220 Installation Guide
PL-DK200 Installation Guide
PL-FD500 Installation Guide
PL-FD510 Installation Guide
2. System Parameters Setup
After entering all system parameters, check that each unit is correctly recog-
nized by the PL.
Chapter 3 Installing Optional Units and Expansion Boards
PL-HD220 Installation Guide
PL-DK200 Installation Guide
PL-FD500 Installation Guide
PL-FD510 Installation Guide
3. OS Setup
The PL unit is designed to operate using the following OS types.
The PL unit is designed to operate under the following standard Windows OS versions.
PL operation with any other maker’s OS is not guranteed.
• MS-DOS
®
6.2
• Windows NT
®
4.0 (Windows Service Pack 6a or higher)
• Windows
®
2000 (Windows Service Pack 4 or higher)
4. PL Driver and Utility Setup
Use the [PL-5910 Series User Manual & Driver CD] to install the necessary drivers
and utility software.
For installation details,
Windows
®
: 7.1 Installation Methods
MS-DOS: 8.1 MS-DOS
®
Utility Programs
5. Driver Installation
Install the drivers required for your system.
Windows
®
: 7.2 Installing Drivers
MS-DOS: 8.1.7 LAN Drivers
6.2
Setting Up Your PL OS
