Preface
4
PL-5910 Series User Manual
CAUTION
• Do not strike the touch panel with a hard, heavy or
pointed object, or press on the touch panel with exces-
sive force, since it may damage the panel.
• Do not expose the PL to, or operate the PL in direct sun-
light, high temperatures and humidity, and in areas where
excessive dust and vibration will occur.
• Do not use the PL in areas where sudden, extreme changes in
temperature can occur. These changes may cause conden-
sation to form inside the unit, possibly causing an accident.
• To prevent the PL from overheating, be sure its air cir-
culation vents are clear and clean, and keep the unit’s
operation area well-ventilated.
• Do not operate or store the PL near chemicals, or where
chemicals can come in contact with the unit.
• To extend the lifetime of the PL unit's Hard Disk Drive
(HDD), use the BIOS, [POWER MANAGEMENT SETUP]-
[HDD Power Down] setting to stop the HDD motor when
the HDD is not being operated. The factory setting of
“5Min” is recommended.
With Windows®2000:
Use the [Control Panel] -> [Power Option] -> [Power Set-
ting] feature to turn the HDD off when not in use.
(Recommended setting: [After 5 mins]
When PL Hard Disk Drive (HDD) data is lost:
• The Digital Electronics Corporation cannot be held re-
sponsible or provide any compensation for damage(s)
caused by the loss of data stored in the PL unit’s hard
disk drive (HDD). It is therefore strongly suggested that
all important data and software be backed up regularly
to an external data backup device.
• Be aware that the Digital Electronics Corporation bears no
responsibility for any damages resulting from the
customer’s application of this unit’s hardware or software.
