1-1
PL-5910 Series User Manual
Chapter
1
PL Basics
1. PL Setup
2. PL System Design
3. Optional Items
1.1
PL Setup
• After completing the hardware setup and before any data or applica-
tions can be installed on the hard disk drive, the OS (Windows
®
or MS-
DOS
®
) must be used to initialize the HDD and create partitions. For
details concerning these procedures, refer to the OS maker’s installa-
tion manual.
• After turning the PL OFF, be sure to wait at least 5 seconds before
turning ON again. If the unit is stated within 5 seconds, it may not start
up correctly.
• The PL is designed for use with MS-DOS
®
, WindowsNT
®
4.0, and Win-
dows
®
2000. Other operating systems are not supported by this PL
unit's driver software.
Use the following steps to set up your PL unit.
4.3 Wiring the PL
Chapter 5 System Setup
OS manufacturer’s installation manual
When using Windows, see 7.1 Driver
Installation
When using MS-DOS, see 8.1 Driver
Installation
Install the required applications. Please refer to
each application's installation manual for setup
instructions.
Install the OS
Copy all Drivers and
Utility Programs
Install Individual
Drivers
Setup System
Install Applications
Install PL unit
Turn PL ON
Install Hard Disk
