Chapter 5 - System Setup
5-17
PL-5910 Series User Manual
Assign IRQ For VGA
Designates if the interrupt used by the VGA controller is enabled or disabled. The two
selections available are [Disabled] and [Enabled]. The [Disabled] selection is factory set and
recommended for most users.
INT Pin 1(2/3/4/5/6/7/8) Assignment
Used when manually allocating the PCI interrupt signal to an IRQ. Select either [Auto], [3],
[4], [5], [7], [9], [10], [11], [12], [14], or [15]. Factory setting is [Auto].
