08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
69
/
257
Section 5-1
Chapter 5
Disassembly/Assembly
This chapter describes how to replace the maintenance parts, and clean the scanner to ensure the normal operations. When
assembling the maintenance parts, conduct necessary cleaning when instructed in this manual.
5-1 For the safety operation
Please read this page carefully before disassembling or assembling.
Warning
Electric shock
Before disassembling and assembling, turn the power switch off, and unplug the AC power source
from the outlet. If you do not do this, an electric shock may occur.
Injury
Be careful not to get your fingers, hair, clothes or accessories caught in a moving part.
It
may
cause
injury.
Machine damage
Static Electricity may cause the damage to the scanner.
When repairing the scanner, wear a wrist strap to avoid ESD.
Notes when cleaning
When cleaning the scanner, be careful not to allow foreign matter, such as dried ink and toner, to fall
inside the scanner.
How to unlock Plastic hooks
Many parts of the scanner are held in place with plastic hooks.
When removing parts that are held in place with hooks, be very careful not to break the hooks.
Pull out the latch to unlock, then pull up on the assembly to remove.
HOOK
Do not use excessive force when
removing parts held in place with hooks.
