08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
47
/
257
Section 4-1
Chapter 4 Troubleshooting
4-1 Operation Panel Sequence at Power-on
The following display is shown during initial processing.
Function No. Display
Power LED
Description
ON
Displays “8” without blinking.
Immediately after power-on, scanner turns all the segments ON.
When the initial processing starts, the following display is shown.
Function No. Display
Power LED
Description
ON
Displays “P” without blinking.
It indicates scanner is currently in initial processing.
When the lamp intensity is getting close to the standard value, the following display is shown.
Function No. Display
Power LED
Description
ON
Displays “0” without blinking.
It indicates the lamp intensity is getting close to the standard value.
When the initial processing terminates properly, the following display is shown.
Function No. Display
Power LED
Description
ON
Displays
default
Function No. without blinking.
It indicates that scanner is in ready state.
The Function No. is incremented by 1 every time the Function button is pressed. After Function No. 9 is displayed, the number
changes to “C” and then returns to “0”.
Any error at initial processing (self-diagnosis) is displayed on the Operator Panel (Fucntion No. Display).
