08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
18
/
257
Section 1-1-7
1-1-7 Multi feed Detection Condition
One of the following method of multi feed detection is selected by the driver.
-
Check overlapping
-
Check length
-
Check overlapping and length
The following condition is required for each selection:
1) Check overlapping
-
Paper weight: 0.05 – 0.26 mm, 41~210 g/m
2
-
Punched holes are not allowed within 35 mm (2.12 in) of the vertical centerline of the document.
-
Other paper shall not be glued within 35 mm (2.12 in) of the vertical centerline of the document.
2) Check length
-
Document length deviation: 1 % or less
-
Punched holes are not allowed within 35 mm (2.12 in) of the vertical centerline of the document.
3) Check overlapping and length
-
Paper weight: 0.05 – 0.26 mm, 41~210 g/m
2
-
Document length deviation: 1 % or less
-
Punched holes are not allowed within 35 mm (2.12 in) of the vertical centerline of the document.
-
Other paper shall not be glued within 35 mm (2.12 in) of the vertical centerline of the document.
When the overlapping check is specified, the papers which contact closely each other, such as glued paper or
electro-statically charged paper, can result in the miss-detection of multi feed.
Multifeed detection monitoring area
35
