08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
202
/
257
Section 8-3-2
4. Raise the Locking Flaps (2 places on the rear).
5. Swing the Locking Flaps inwards until they are locked into place.
6. Connect the Imprinter cable (EXT cable) to the connector in the rear of the Scanner.
The Imprinter will not work if the EXT cable is not connected to the Scanner.
Scanning without the EXT cable connection can cause documents to jam inside the Imprinter.
7. Replace the stacker (removed in step 2) to the Imprinter.
8. Connect the AC cable to the scanner.
d
Reconnect the other arm
by sliding it in gently.
c
Insert one arm.
