08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
249
/
257
Section 8-9-2
8-9-2 Cleaning the Imprinter
After frequent use, the waste ink will begin to accumulate on the base surface of the Print Cartridge Holder, which can soil
printouts. Always maintain the base surface clean.
To assure high quality print outs and long use of the Imprinter, adopt a daily maintenance procedure as given below.
- When cleaning, wipe off gently all dust and ink on the base surface of the holder.
- If the ink has dried, wipe it lightly with a water-moistened cloth.
1. Press the button to turn off the scanner.
2. Open the print cartridge. (Refer to Section 8-9-4).
3. Open the Print section.
4. Wipe off any dirt or dust on the base surface of the Print Cartridge Holder with a lint-free cloth.
When cleaning, be careful not to touch the metal wheels
located behind the upper rollers on the Print section.
5. Check that the dirt is wiped off, and then close the Print section.
6. Reinstall the print cartridge and close the Print Cartridge Cover (Refer to Section 8-9-4).
