08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
178
/
257
Section 7-1-2
7-1-2 Loading Documents on the ADF for Scanning
1. Align the edges of the documents.
1) Confirm that all the documents have the same width.
2) Check the number of sheets in the document stack.
The standard number of sheets that can be loaded on the scanner is as follows:
- A4/Letter-size paper or smaller that makes a document stack of 5mm or less
- Maximum 50 sheets at A4/Letter, 20 lb., or 80 g/m
2
2. Fan the documents as follows:
1) Select a stack of documents 5mm or less high.
2) Hold the document with both hands and fan it out several times.
3) Turn the document by 90 degrees, and then fan it in the different orientation again.
4) Align the document edges.
3. Load the document on the ADF paper chute (Chuter Unit).
Set the documents face-down in the ADF paper chute (Chuter Unit) (so that the side to be scanned faces towards the
ADF paper chute (Chute Unit)).
Pull out the extension to support the document when necessary.
Extension
