08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
168
/
257
Section 6-1-5
[Display after adjustment]
After the white level adjustment, the following display appears depending on its terminated status.
(1) When the white level adjustment is terminated normally
Screen T41
Function No.
Display
Scanner status
Displays “o” without blinking.
The adjustment has terminated normally.
<Available buttons at screen T41>
Function button: Displays screen T42 to write the white level correction value into EEPROM.
Send to button: Terminates this mode and returns to screen T04.
Screen T42
Function No.
Display
Scanner status
“o” (lower half) blinks.
Confirming whether the correction value shall be
written in EEPROM or not.
<Available buttons at screen T42>
Scan/Stop
+ Function button: Start writing the white level correction value into EEPROM. During writing operation, screen
T43 displayed, and when it finishes, screen T44 appears
Send to button:
Terminates this mode and returns to screen T04.
Screen T43
Function No.
Display
Scanner status
“L” lights without blinking.
Correction value is being written in EEPROM.
Note: While screen T43 is displayed, no button can function.
Screen T44
Function No.
Display
Scanner status
“o” (upper half) lights without blinking.
The value has written normally.
<Available buttons at screen T44>
Send to button: Terminates this mode and returns to screen T04.
