08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
63
/
257
Section 4-3-26
4-3-26 “Lamp alarm”
Table 3-3-26
Item
No.
Check items
How/where to check
1
Does the same symptom occur after
turning OFF and ON the scanner?
Press power button of the scanner for more than 2 seconds to
turn it OFF, and after more than 2 seconds elapse, press the
power button to turn the scanner ON.
2
Does any foreign object get inside the
Control PCA?
Take out the Control PCA for checking (Refer to Section 5-11).
3
Are the cables between Control PCA and
the lamps damaged? Or are the
connectors connected correctly?
Refer to the following sections for checking the cables and
connectors.
Lamp (ADF front): Refer to Section 5-9-4.
Lamp (ADF back): Refer to Section 5-10-6.
Lamp (FB): Refer to Section 5-12-7.
4
Replace the Control PCA and see if the
error is resolved.
Refer to Section 5-11 for replacement.
4-3-27 “L6: US sensor alarm”
Table 4-3-27
Item
No.
Check items
How/where to check
1
Does the same symptom occur after
turning OFF and ON the scanner?
Press power button of the scanner for more than 2 seconds to
turn it OFF, and after more than 2 seconds elapse, press the
power button to turn the scanner ON.
2
Check the US Sensor operation.
Conduct Maintenance mode (refer to Section 6-1-2) to see if
the US sensor works properly.
If the error still occurs, confirm that the sensor cable is
correctly connected. And then replace the US Sensor FX and
US Sensor RV. (Refer to Sections 5-9-5 “US Sensor FX
(Multifeed detection)” and Section 5-10-7 “US Sensor RV
(Multifeed detection).”)
4-3-28 “F: ROM sum check alarm”
Table 4-3-28
Item
No.
Check items
How/where to check
1
Does the same symptom occur after
turning OFF and ON the scanner?
Press power button of the scanner for more than 2 seconds to
turn it OFF, and after more than 2 seconds elapse, press the
power button to turn the scanner ON.
2
Replace the Control PCA and see if the
error is resolved.
Refer to Section 5-11 for replacement.
4-3-29 Driver error
Table 4-3-29
Item
No.
Check items
How/where to check
1
Does the same symptom occur after
turning OFF and ON the scanner?
Press power button of the scanner for more than 2 seconds to
turn it OFF, and after more than 2 seconds elapse, press the
power button to turn the scanner ON.
2
Is the connector between the scanner and
the PC correctly connected?
Refer to Section 2-2-2.
3
Replace the Control PCA and see if the
error is resolved.
Refer to Section 5-11 for replacement.
