08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
158
/
257
Section 6-1-2
6-1-2 Maintenance mode #1: Paper feeding / Sensor / Background changeover test
This mode tests the ADF/FB paper feeding operation at the selected speed, checks each status (ON/OFF) of the ADF sensors,
and tests background changeover.
[How to start]
(1) From screen T04, press the Function (
△
or
▽
) button to select (Maintenance mode #1) and press the Scan/Stop button.
The selection screen for scanning speed/sensor/Background changeover test appears. A number is shown on the Function No.
Display indicating the selected scanning speed or test mode as follows.
Function No.
Display
Scanning speed/test mode
Remarks
0
Monochrome 600 dpi
Default
1
Monochrome 300 dpi
2
Monochrome 240 dpi
3
Monochrome 200 dpi
4
Monochrome 100 dpi
5
Monochrome 150 dpi
6
Monochrome 400 dpi
7 Sensor
test
8
Background changeover test
<Paper feeding test>
(2) Select a scanning speed from 0 to 6 (this varies depending on the scanning resolution) from 0 ~ 6 by pressing the Function
button.
When the Imprinter option is NOT connected:
(3) To test the continuous feeding operation, press the Scan/Stop button. The ADF operation is started if any paper on the
ADF paper chute (Chute unit) (Hopper empty sensor = Sensor EMP ON).
To test the one-sheet feeding operation, while pressing the Send to button, press the Scan/Stop button, which switches to
the one-sheet feeding operation mode. Go to step (5).
When the Imprinter option is connected:
(3) To test the continuous feeding operation, press the Scan/Stop button. The function number display requires selecting
whether imprinting is necessary or not.
To test the one-sheet feeding operation, while pressing the Send to button, press the Scan/Stop button, which switches to
the one-sheet feeding operation mode. The function number display requires to select whether imprinting is necessary or
not. When the display changed, press the Send to button.
Function number display
Mode
Remarks
－
NO imprinting
Default (Screen T11)
P Imprinting
Screen
T12
●
Test print specification
Printing position: The test pattern below are printed out starting at 5mm from the leading edge of the paper.
Test pattern 1: ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_` (32 characters, horizontal)
Test pattern 2: abcdefghijklmnopqrstuvwxyz{|}~ (31 characters, horizontal)
Test pattern 3: !"#$%&'()*+,-./0123456789:;<=>?@ (32 characters , horizontal)
Test pattern 4: ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_` (32 characters, vertical)
Test pattern 5: abcdefghijklmnopqrstuvwxyz{|}~ (31 characters, vertical)
Test pattern 6: !"#$%&'()*+,-./0123456789:;<=>?@ (32 characters, vertical)
The test pattern above is postfixed with an 8-digit-number. A total of 40 characters are printed in pattern 1, 3,
4 or 6. A total of 39 characters are printed in pattern 2 or 5.
Printing is repeated in the order of pattern 1
Î
2
Î
3
Î
4
Î
5
Î
6
Î
1
Î
2
Î
3…
The numbering data portion is incremented by one from “00000000.”
