08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
174
/
257
Section 6-1-8
6-1-8 Maintenance mode #7: EEPROM data restore
When replacing the Panel PCA, the EEPROM data on the Panel PCA shall be moved to the flash memory of the Control PCA. In
this mode, the data is restored from the Control PCA to the Panel PCA.
[How to start]
(1) Selects Maintenance mode #7 in screen T04 and press Scan/Stop button. The following display appears.
Screen T71
Function No.
Display
Scanner status
“o” (lower half) blinks.
Confirming whether the data shall be restored or not.
<Available buttons at screen T71>
Scan/Stop
+ Function button: Returns the data from the Control PCA to the EEPROM on the Panel PCA. During restoring
operation, screen T72 is displayed.
Send to button:
Terminates this mode and returns to screen T04.
Screen T72
Function No.
Display
Scanner status
“L” lights without blinking.
The data is being restored.
Note: While screen T72 is displayed, no button can function.
[Display of the result]
(1)
When the data restore terminated normally, the following display appears.
Screen T73
Function No.
Display
Scanner status
Displays “o” (upper half) without blinking.
The data has restored normally.
<Available buttons at screen T73>
Send to button: Terminates this mode and returns to screen T04.
(2) When no data exists in the Control PCA, the following display appears.
Screen T74
Function No.
Display
Scanner status
Displays “c” without blinking.
No data exists in the Control PCA.
<Available buttons at screen T74>
Send to button: Terminates this mode and returns to screen T04.
