08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
205
/
257
Check
Fuction
Send to
Scan
/Stop
Power
Check
Fuction
Send to
Scan
/Stop
Power
Check
Fuction
Send to
Scan
/Stop
Power
Function
Number Display
Check
Function
Send to
Power
Scan
/Stop
Section 8-3-4
8-3-4 Operation Test
After installing the Imprinter, check if the printing operation can be done in the Offline Print Test mode of the scanner.
1. While holding down the Function button on the Operator
Panel, press the button.
Keep the Function button pressed until the button is
pressed.
2. Release the Function button when the Function Number
Display changes from [P] to [b].
3. Place a blank paper into the ADF paper chute (Chuter Unit).
- Use A4 or Letter size paper. If the size is smaller than
A4 or Letter,, printing may not complete successfully.
- Confirm that the Print cartridge is positioned within the
paper width.
4. Press the Scan/Stop button to test.
=> The paper will be fed into the ADF, and the
Imprinter will print out the
Print Test Patterns
starting at 5mm from the paper edge (the range of
error is
±
4mm).
Print Test Patterns
Test pattern
１
(horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_`00000000
Test pattern 2 (horizontal):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 3 (horizontal):
!”#$%&()*+,-./0123456789:;<=>?@00000000
Test pattern 4 (vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_`00000000
Test pattern 5 (vertical):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 6 (vertical):
!”#$%&()*+,-./0123456789:;<=>?@00000000
When multiple sheets of paper are placed in the ADF,
the Test Print repeats patterns from 1 through 6.
The numbering data portion “00000000” changes
from 0 (Zero) with increment of 1 (one).
(One test pattern is printed at a time. Press the
Scan/Stop button to continue printing the next test
pattern.)
7.
To stop Offline Print Test mode, press the button.
The scanner will switch off.
5mm
1 2 3 4 5 6
Feedin
g d
irec
tio
n
Print test sample
