08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
251
/
257
Print Cartridge Holder
Section 8-9-4
8-9-4 Replacing the Print Cartridge
When the message shown on the right appears, replace the print
cartridge as soon as possible.
- If you continue to print without replacing the cartridge, your print
output will be faded.
- When installing or replacing the print cartridge, be careful not to
insert it out of place.
Refer to Section 8-1-1 for the specification of the Print cartridge.
1. Press the button to turn off the scanner.
2. Open the Print Cartridge Cover by grasping its center
and turning it towards you, as shown on the right.
3. Open the Print Cartridge Holder by slightly pinching and
lifting up its locking lever with your fingers as shown
below.
4. Remove the old print cartridge from the Print Cartridge
Holder as shown on the right.
5. Take the new print cartridge out of its pouch and detach
the protection tape from the Print cartridge.
Do not touch the metal part of the cartridge nor put the tape back on again.
6. Place the print cartridge into the holder with its tab pointing to the right.
Be careful not to let the print cartridge touch or catch onto the print circuit film.
Example
