08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
101
/
257
Section 5-9-9
5-9-9 PICK Motor ASSY
- Refer to Section 3-9 for the part number of the replacement part.
- Refer to Appendix for the specification of the screws.
<Removal>
Remove the imprinter (option).
fi-6140/fi-6130 with Imprinter Referring to Section 8-6-4 “Removing Imprinter”, remove the Imprinter.
Remove Flatbed.
fi-6240/fi-6230 Referring to Section 5-7 “Removing Flatbed,” remove the Flatbed.
1. Remove Chuter Unit.
(1) Referring to Section 5-8-1 “Chuter Unit (ADF Paper Chute),” remove the Chuter Unit.
2. Remove Control PCA.
(2) Referring to step (2) of Section 5-11 “Control PCA,” remove the Control PCA.
3. Remove Base Unit Cover.
(3) Referring to steps (3) ~ (7) of Section 5-9-1 “Base Unit,” remove the Base Unit Cover.
4. Remove Guide P ASSY.
(4) Referring to steps (2) ~ (3) of Section 5-9-8 “Guide P ASSY (Sheet Guide),” remove the Guide P ASSY (Sheet Guide).
5. Remove PICK Motor ASSY.
(5) - Open the Upper Unit.
- Remove two screws C (circles below) of the PICK Motor ASSY.
(6) - Draw the PICK Motor ASSY out of the Base Unit.
PICK Motor ASSY
Base Unit
PICK Motor ASSY
Upper Unit
Base Unit
