08
July 27, 09 K.Okada
A.Miyoshi I.Fujioka
Refer to Revision Record on page 2.
TITLE
fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR
Maintenance Manual
07
Nov.12, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
CUST.
06
Mar.10, 08 K.Okada
T.Anzai
I.Fujioka
Refer to Revision Record on page 2.
DRAW
No.
P1PA03540-B0XX/6
Rev. DATE DESIGN CHECK APPR. DESCRIPTION
Design
July 27, 2007
K.Okada
CHECK
K.Okada
APPR.
T.Anzai
PFU LIMITED
Page
68
/
257
06 Section 4-3-41
4-3-41 Frequent “J0: paper jam” (paper protection function)
fi-6140/fi-6240
Paper protection function:
Detects folded documents or nonconforming thin paper, and cancels scanning.
Table 4-3-41
Item
No.
Check items
How/where to check
1
Does the document satisfy the paper
specification?
Refer to Section 1-1-6.
2
Have the documents been jogged?
•
Align the edge of documents for stable paper feeding.
•
Remove documents with crease or dog-ear.
•
Scanning different width of documents may cause skew
and result in paper jam.
3
Are Chuter Unit (ADF paper chute),
Guide P ASSY (Sheet guide), Feed roller
cover (plate guide) and Brake roller
cover installed correctly?
Chuter Unit (ADF paper chute): Refer to Section 5-8-1
Guide P ASSY (Sheet guide): Refer to Section 5-9-8.
Feed roller cover (plate guide): Refer to Section 5-10-7.
Brake roller cover: Refer to Section 7-3-3.
4
Replace Pick roller or Brake roller, and
see if the error is resolved.
Check the consumable counter from the TWAIN driver screen
or from the built-in Maintenance mode. When the counter
exceeds the values shown in Section 7-3-1, replace Pick roller
or Brake roller.
5
Check the performance of PICK sensor
or TOP sensor. If not operating, then
replace the sensor.
Referring to Section 6-1-2, perform the sensor test.
Refer to Section 6-2 “Saving EEPROM data” for the sensor
installation position.
PICK sensor/TOP sensor: Refer to Section 5-9-5.
6
Check the performance of the Cover
Open Sensor. If not operating, then
replace the sensor.
Referring to Section 6-1-2, perform the sensor test.
Refer to Section 6-2 “Saving EEPROM data” for the sensor
installation position.
Cover open sensor: Refer to Section 5-9-12.
7
Check if the Paper protection roller
rotates and moves up and down
smoothly. If not operating, then replace
the Base Unit.
Refer to Section 6-2 “Saving EEPROM data” for the
installation position of the Paper protection roller.
Base Unit: Refer to Section 5-9-1.
8
Replace the Control PCA and see if the
error is resolved.
Refer to Section 5-11.
