Viewing the Data
52
P/N CLS151164 Rev. B
LabChip GX Touch/GXII Touch User Manual
PerkinElmer, Inc.
Viewing Graphs in the Egram Tab
The
displays a graph containing the data from one or
more completed wells. Data from multiple wells can be displayed in
the same graph for visual comparison. The data file name and well
name display at the top of the graph.
To navigate through the wells on a plate, touch the
Left
,
Right
,
Up
,
and
Down
buttons. The
and the
update to display the current well.
Select the
Scale to Sample Peaks
check box to scale the view to
the minimum and maximum X values of the current sample peaks.
Marker and/or system peaks are ignored. (If Overlay is selected,
the view scales to the sample peaks in the most recently selected
well.)
Clear the
Scale to Sample Peaks
check box to scale the view to
the minimum and maximum X values of all peaks, including marker
peaks and system peaks.
To change the graph view options, select the
Graph Settings
check
box and select the desired options in the
.
Viewing Data in the Gel Tab
To compare the gels of all wells, view the gels in the
The color, width, and contrast of the gels can be changed using the
.
Select the Overlay check box to select multiple gels. The selected
wells display in the graphs in the
.
Zoom In and Zoom Out
You can zoom in and out on data displayed in the
,
, and
. The Graph and the Gel on the Egram/Gel
tab both zoom to the same levels when either view is zoomed in. All
tabs also zoom to the same levels.
To zoom in:
•
Touch and drag on a graph or gel to enclose the region of
interest. The selected area enlarges to fill the view. In the Gel
tab, all lanes zoom to the same level. In a Gel, drag straight up
or down in a single gel lane to zoom in. Dragging horizontally
pans the view of the gels.
•
You can continue zooming in until you reach the maximum
magnification (the graph will not zoom in any closer).
