Viewing the Data
50
P/N CLS151164 Rev. B
LabChip GX Touch/GXII Touch User Manual
PerkinElmer, Inc.
b
Touch each well to view in the overlay graphs. Multiple wells
can be selected at the same time. Touch a well again to
deselect the well.
5
To display the analyzed data on the
,
and
, select the
Perform Sample Analysis
check box.
To display the raw data only, clear the
Perform Sample
Analysis
check box.
6
Use the gels in the
or the
to select the
wells if there are multiple cycles. Touching a well in the
selects the well data from the last plate cycle.
7
To view the data in the
, see
8
, see
9
To view the data in the
, see
.
10
See
Zoom In and Zoom Out on page 52
for details on zooming
graph and gel views.
Viewing Data in the Egram/Gel Tab
The
displays a graph at the top of the tab and the
gels of all the well data at the bottom of the window. The graph at
the top of the window can display a single well or multiple wells
overlaid in the same graph. Gels for all wells in the run display at
the bottom of the window.
The wells selected on the
The wells to view can also be selected using the gels on the bottom
of the Egram/Gel tab:
1
Select or clear the
Overlay
check box.
2
Touch a gel at the bottom of the tab to add the graph to the
overlay. If the overlay check box is selected, the most recently
added well displays at the top of the overlay graph. If the
Overlay check box is not selected, only one well can be
selected.
3
To change the graph display options, select the desired options
in the
on the
4
To change the gel display options, select the desired options in
the
.
