Software Reference
77
P/N CLS151164 Rev. B
LabChip GX Touch/GXII Touch User Manual
PerkinElmer, Inc.
Prime Window
Use the Prime window to prime chips that do not support Protein
Clear HR assays. The chip must be primed for the same assay (or
assay family) as the assay that will run on the chip. To use the chip
for a different assay, wash and reprime the chip by selecting the
correct assay and using the appropriate reagents. Load the buffer
tube and the chip before opening the Prime window. To open the
Prime window, touch the
Prime
button on the
Figure 22. Prime Window
The Prime window contains the following options and buttons:
Change Assay Folder button
- Touch to select the folder that
contains the desired assays.
Assay
- Specifies the assay for which to prime the chip. The
selections available depend on the chip type and the assay type
that was selected when the chip was inserted.
Run Test Ladder after Prime check box
- If selected, runs one
ladder well after priming is complete.
Prime button
- Starts priming the chip and displays the status of
the priming step.
