Software Reference
71
P/N CLS151164 Rev. B
LabChip GX Touch/GXII Touch User Manual
PerkinElmer, Inc.
Navigation Bar
The Navigation Bar on the left side of the
provides access to the main functions of the LabChip GX
Touch software. Touching a navigation button opens the
corresponding window.
The Navigation bar contains the following buttons:
Home button
- Opens the
calibration, pressure line purge, run, or wash operation or
to load/unload plates or chips.
Status button
- Opens the
to view the
current status of the instrument, chip, and run. For Protein
Clear HR and ProteinEXact assays, the status of
prime/calibration displays.
Views button
- Opens the
to view data from
the last completed run. After a new run is started or the
software is closed, data from a completed run is no longer
available in the LabChip GX Touch software. Use the
LabChip GX Reviewer software to view or analyze data
from previous runs.
Tools button
- Opens the
to add plates, run
software and hardware diagnostics, select Auto export
options, calibrate the optics, or access PerkinElmer service
engineer software functions.
Exit button
- Closes the LabChip GX Touch software.
Error button
- Only displays if an error has occurred. Opens the
Current Events Tab to view the error details and to clear the error.
Warning button
- Only displays if a Warning has occurred. Opens
the Current Events Tab to view the warning details and to clear the
warning.
Stop button
- Stops the current operation in progress. If running a
plate, the run stops immediately and the current well does not finish
reading. Any data collected from the current well is discarded. If
priming or washing a chip, the prime or wash stops immediately.
